Why there are 33 settings
The dial permits 64 physical combinations, but several duplicate the same loft and lie. COBRA publishes the 33 unique outcomes.
The adjustment range
- Loft spans 2° lower through 2° higher.
- Lie spans 2° flat through 2° upright.
- SMARTPAD is designed to preserve a square face presentation at address.
The handedness rule
Setting labels and loft values remain the same while lie direction reverses between the official right- and left-handed charts.
Start from A1
COBRA’s fitting flow begins at A1 and moves to nearby settings based on a group of shots. That is more reliable than reacting to one swing.
Verified table
COBRA FutureFit33 settings
Separate official RH and LH charts; lie directions reverse by hand.
| Setting | Loft | Lie | Face / designation |
|---|---|---|---|
| A1 | 0° | Standard lie | SMARTPAD is designed to keep the face square at address |
| A2 | -0.7° | 0.3° flat | SMARTPAD is designed to keep the face square at address |
| A3 | -1° | 1° flat | SMARTPAD is designed to keep the face square at address |
| A4 | -0.7° | 1.7° flat | SMARTPAD is designed to keep the face square at address |
| A5 | 0° | 2° flat | SMARTPAD is designed to keep the face square at address |
| A6 | +0.7° | 1.7° flat | SMARTPAD is designed to keep the face square at address |
| A7 | +1° | 1° flat | SMARTPAD is designed to keep the face square at address |
| A8 | +0.7° | 0.3° flat | SMARTPAD is designed to keep the face square at address |
| B1 | +0.7° | 0.3° upright | SMARTPAD is designed to keep the face square at address |
| B3 | -0.3° | 0.7° flat | SMARTPAD is designed to keep the face square at address |
| B4 | 0° | 1.4° flat | SMARTPAD is designed to keep the face square at address |
| B6 | +1.4° | 1.4° flat | SMARTPAD is designed to keep the face square at address |
| B7 | +1.7° | 0.7° flat | SMARTPAD is designed to keep the face square at address |
| C1 | +1° | 1° upright | SMARTPAD is designed to keep the face square at address |
| C2 | +0.3° | 0.7° upright | SMARTPAD is designed to keep the face square at address |
| C4 | +0.3° | 0.7° flat | SMARTPAD is designed to keep the face square at address |
| C7 | +2° | Standard lie | SMARTPAD is designed to keep the face square at address |
| C8 | +1.7° | 0.7° upright | SMARTPAD is designed to keep the face square at address |
| D1 | +0.7° | 1.7° upright | SMARTPAD is designed to keep the face square at address |
| D2 | 0° | 1.4° upright | SMARTPAD is designed to keep the face square at address |
| D3 | -0.3° | 0.7° upright | SMARTPAD is designed to keep the face square at address |
| D6 | +1.4° | Standard lie | SMARTPAD is designed to keep the face square at address |
| D8 | +1.4° | 1.4° upright | SMARTPAD is designed to keep the face square at address |
| E1 | 0° | 2° upright | SMARTPAD is designed to keep the face square at address |
| F1 | -0.7° | 1.7° upright | SMARTPAD is designed to keep the face square at address |
| F2 | -1.4° | 1.4° upright | SMARTPAD is designed to keep the face square at address |
| F3 | -1.7° | 0.7° upright | SMARTPAD is designed to keep the face square at address |
| F4 | -1.4° | Standard lie | SMARTPAD is designed to keep the face square at address |
| G1 | -1° | 1° upright | SMARTPAD is designed to keep the face square at address |
| G3 | -2° | Standard lie | SMARTPAD is designed to keep the face square at address |
| G4 | -1.7° | 0.7° flat | SMARTPAD is designed to keep the face square at address |
| H1 | -0.7° | 0.3° upright | SMARTPAD is designed to keep the face square at address |
| H4 | -1.4° | 1.4° flat | SMARTPAD is designed to keep the face square at address |
Primary documentation