Eight combinations, two cogs
Callaway pairs four loft choices with two lie designations. Because the cogs rotate independently, every loft can be paired with N or D.
What the markings mean
- S means the loft stamped on the head.
- -1 removes one degree.
- +1 and +2 add one or two degrees.
- N is Neutral; D is Draw.
Why lie numbers are unknown
Callaway’s consumer instructions name N and D but do not give a numeric lie delta. The designation is stored; the number remains null.
Handedness
Recommendations assume that the shaft sleeve and head match the golfer’s handedness. Mixed fitting-cart parts require Callaway’s separate conversion chart.
Verified table
Callaway OptiFit settings
Assumes a matching-hand sleeve and head.
| Setting | Loft | Lie | Face / designation |
|---|---|---|---|
| -1/N | -1° | N — manufacturer Neutral setting | Not published as a measured value |
| -1/D | -1° | D — manufacturer Draw setting | Not published as a measured value |
| S/N | 0° | N — manufacturer Neutral setting | Not published as a measured value |
| S/D | 0° | D — manufacturer Draw setting | Not published as a measured value |
| +1/N | +1° | N — manufacturer Neutral setting | Not published as a measured value |
| +1/D | +1° | D — manufacturer Draw setting | Not published as a measured value |
| +2/N | +2° | N — manufacturer Neutral setting | Not published as a measured value |
| +2/D | +2° | D — manufacturer Draw setting | Not published as a measured value |
Primary documentation